Tremulous Forum
Community => Servers => Topic started by: Biszkhopt on January 19, 2009, 01:11:58 pm
-
OK, I know that this is known issue, but unfortunately browsing web I don't manage to find solution. Firstly I'll describe the problem:
i have Linksys WRT54GL router with custom firmware "Tomato" ver 1.20 (linux based with more functions, overclock ability etc.)
I set up port forwarding (30720) to ip that router gives me (i set up so every time i connect i have 192.168.1.121)
i have Fedora Core 10 with 2.6.27-9 kernel (if it change anything with KDE 4.2 RC) installed and I'm starting server with
./tremded.x86 +set dedicated 2 +exec server.cfg +set net_port 30720 +set fs_homepath /home/biszkhopt/.tremulous +net_ip 192.168.1.121
and my output is
tremulous 1.1.0 linux-x86 Sep 14 2006
----- FS_Startup -----
Current search path:
/home/biszkhopt/.tremulous/base
/usr/share/tremulous/base/vms-1.1.0.pk3 (4 files)
/usr/share/tremulous/base/map-uncreation-1.1.0.pk3 (110 files)
/usr/share/tremulous/base/map-tremor-1.1.0.pk3 (45 files)
/usr/share/tremulous/base/map-transit-1.1.0.pk3 (135 files)
/usr/share/tremulous/base/map-niveus-1.1.0.pk3 (134 files)
/usr/share/tremulous/base/map-nexus6-1.1.0.pk3 (151 files)
/usr/share/tremulous/base/map-karith-1.1.0.pk3 (118 files)
/usr/share/tremulous/base/map-atcs-1.1.0.pk3 (87 files)
/usr/share/tremulous/base/map-arachnid2-1.1.0.pk3 (67 files)
/usr/share/tremulous/base/data-1.1.0.pk3 (1229 files)
/usr/share/tremulous/base
----------------------
2080 files in pk3 files
execing default.cfg
execing autogen.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok
--- Common Initialization Complete ---
Opening IP socket: localhost:30720
Hostname: localhost.localdomain
Alias: localhost
Alias: biszkhopt-fedora
IP: 127.0.0.1
Started tty console (use +set ttycon 0 to disable)
execing server.cfg
------ Server Initialization ------
Server: atcs
Hunk_Clear: reset the hunk ok
----- FS_Startup -----
Current search path:
/home/biszkhopt/.tremulous/base
/usr/share/tremulous/base/vms-1.1.0.pk3 (4 files)
/usr/share/tremulous/base/map-uncreation-1.1.0.pk3 (110 files)
/usr/share/tremulous/base/map-tremor-1.1.0.pk3 (45 files)
/usr/share/tremulous/base/map-transit-1.1.0.pk3 (135 files)
/usr/share/tremulous/base/map-niveus-1.1.0.pk3 (134 files)
/usr/share/tremulous/base/map-nexus6-1.1.0.pk3 (151 files)
/usr/share/tremulous/base/map-karith-1.1.0.pk3 (118 files)
/usr/share/tremulous/base/map-atcs-1.1.0.pk3 (87 files)
/usr/share/tremulous/base/map-arachnid2-1.1.0.pk3 (67 files)
/usr/share/tremulous/base/data-1.1.0.pk3 (1229 files)
/usr/share/tremulous/base
----------------------
4160 files in pk3 files
Loading vm file vm/game.qvm...
...which has vmMagic VM_MAGIC_VER2
Loading 881 jump table targets
VM file game compiled to 1205079 bytes of code
game loaded in 34179296 bytes on the hunk
------- Game Initialization -------
gamename: base
gamedate: Dec 27 2006
------------------------------------------------------------
InitGame: \sv_maxPing\0\sv_minPing\0\sv_maxRate\15000\sv_hostname\(-LK-) Polish Clan (testing)\timelimit\60\sv_maxclients\14\sv_minRate\5000\g_suddenDeathTime\60\g_maxGameClients\0\g_unlagged\1\version\tremulous 1.1.0 linux-x86 Sep 14 2006\protocol\69\mapname\atcs\sv_privateClients\0\sv_allowDownload\0\g_needpass\0\gamename\base
!readconfig: could not open admin config file admin.dat
2 teams with 2 entities
-----------------------------------
-----------------------------------
Hitch warning: 959 msec frame time
Resolving master.tremulous.net
master.tremulous.net resolved to 208.116.49.110:30710
Sending heartbeat to master.tremulous.net
Unfortunately after that i cant see my server either in local or internet master list.
Any ideas what could be a problem, any help would be appreciated!
-
I'm not sure what NAT tomato uses, but if its shit then you will never see your server from inside the network.
Do you have the ports forwarded right?
If you do, then run qstat (or xqf for a nice GUI) and see if it lists your server. It may count as a timeout for you but work for the rest of the world.
If it doesn't, you can use wireshark to see if the master server's getinfo's are getting through.
Also check the host firewall.
-
I don't really know how to check qstat, however my firewall (on fedora) was set to forward exactly same port to mine ip so i really don't know what might be wrong.
-
in few moments I make some screenshoots maybe that'll show you more...
-
This is how it looks (I'm not sure about firewall conf coz i put my ip, because I have no idea what other one I could possibly place there)
(http://img178.imageshack.us/img178/1918/79220177pi7.png)
(http://img176.imageshack.us/img176/3024/snap1ab8.jpg)
-
You don't have to use port forwarding on your server PC, in fact I'm not sure if linux handles the case when you forward a port to it's own IP, it could just discard those packets. Just check that the port is not blocked in your firewall, that's probably in the "Trusted Services" or "Other Ports" sections.
-
OK, but even without this port forwarding can't see my server it just sending heartbeats like that
Resolving master.tremulous.net
master.tremulous.net resolved to 208.116.49.110:30710
Sending heartbeat to master.tremulous.net
Sending heartbeat to master.tremulous.net
Sending heartbeat to master.tremulous.net
Sending heartbeat to master.tremulous.net
Sending heartbeat to master.tremulous.net
but I won't see server itself
-
Yuppiii!!!! Issue solved i shall thank you, and beat my self for mine stupidity. Allowing port (30720) from host firewall solved problem.
Now i can see my server in master list.
SO THIS IS CONCLUSION TO ALL PEOPLE HAVING SIMILAR ISSUE:
1 - CHECK IF YOU ARE FORWARDING PORT ON YOUR ROUTER (FOR ALL PEOPLE WITH LINKSYS WRT SERIES I RECOMMEND USING "TOMATO" FIRMWARE)
2 - SET UP YOUR FIREWALL TO ALLOW THAT PORT (I REALLY DON'T THINK THAT DISABLING IS GOOD IDEA)
3 - MAKE SURE THAT YOU'RE STARTING SERVER WITH:
+set net_port 30720
or any port you're using to start server
and
+net_ip youreip
good luck!
-
So how do you change the settings that come up in command prompt when you start your server?
-
By not posting crap in lots of unrelated threads.
-
Umm that was quite unnecessary, as that was related because he posted that one solution was to make sure it was set up as "+set net_port 30720" so please dont be a Jerk while I'm trying to learn.