Tremulous Forum

Media => Mapping Center => Topic started by: |MoT|Erfe555 on July 16, 2009, 05:24:38 pm

Title: Problem with doors...i think
Post by: |MoT|Erfe555 on July 16, 2009, 05:24:38 pm: Hi all i do my first map and when i make a wall and i use it with "func_door" i think that i create a door.
But i have an error when compiling:

(http://img31.imageshack.us/img31/7263/erroreradiant.jpg)

How can i resolve it?
Title: Re: Problem with doors...i think
Post by: A Spork on July 16, 2009, 07:21:31 pm: Your entire wall is a door.
Doors don't count as structural brushes per say, so the map leaks.
Therefore, to fix the leak, you need to have structural brushes making an enclosure on the other side of the door.
Title: Re: Problem with doors...i think
Post by: mooseberry on July 16, 2009, 08:30:25 pm: Hello... Are you going to walk through that door out of your map.. don't think so. Than make something on the other side. ::)
Title: Re: Problem with doors...i think
Post by: Archangel on July 16, 2009, 09:59:24 pm: oh christ.. in b4 badly textured and lit boxmap.
Title: Re: Problem with doors...i think
Post by: Repatition on July 17, 2009, 03:39:15 am: ITS A WORK IN PROGRESS DUMIE! cant you see the map is just in the very beging stages! archangel you are a disgrace to tremulous you alway going around starting fights! I cant bear this forum beacuase of youy
Title: Re: Problem with doors...i think
Post by: mooseberry on July 17, 2009, 05:39:37 am: Quote from: Repatition on July 17, 2009, 03:39:15 am
ITS A WORK IN PROGRESS DUMIE! cant you see the map is just in the very beging stages! archangel you are a disgrace to tremulous you alway going around starting fights! I cant bear this forum beacuase of youy

Ok. We're sorry, Archangel is a big bully just ignore him.

Oh, one tip I have though, try not to make badly textured and badly lit boxmaps.
Title: Re: Problem with doors...i think
Post by: Demolution on July 17, 2009, 08:10:38 am: Archangel isn't afraid to speak his mind (and ours) most times.

The maps is a little less than what I had the first time I tried my hand at mapping. Keep it up though, I'm sure you will achieve at least something decent.
Title: Re: Problem with doors...i think
Post by: Archangel on July 17, 2009, 11:53:46 am: Quote from: Repatition on July 17, 2009, 03:39:15 am
ITS A WORK IN PROGRESS DUMIE! cant you see the map is just in the very beging stages! archangel you are a disgrace to tremulous you alway going around starting fights! I cant bear this forum beacuase of youy

+sig'd. classic.
Title: Re: Problem with doors...i think
Post by: |MoT|Erfe555 on July 17, 2009, 12:13:37 pm: I do something decent, but the photo that i post was only the beginning of the map of course.
Now i do all, but the door...same problem.
Sry i'm a n00b for maps...
Anyway i do func_door on the two side of the door but only when i "press" these sides the door open, well...not open.
Because i listen the sound of the door open but only the two sides open.
Can you help me? thx.
Title: Re: Problem with doors...i think
Post by: |MoT|Erfe555 on July 17, 2009, 12:35:26 pm: P.S= Without tremmapping, is there a tutorial that explain well how to do doors in trem?
Title: Re: Problem with doors...i think
Post by: |MoT|Erfe555 on July 17, 2009, 02:22:04 pm: I tried to adjust the func_door with the suggest of tremmapping wiki.
Anyway i have a similar error:

(http://img23.imageshack.us/img23/3203/errorradiantbasic.jpg)

Can someone help me?
Thx.
Title: Re: Problem with doors...i think
Post by: |MoT|Erfe555 on July 17, 2009, 02:24:16 pm: Anyway in the entities menu i selected func_door and i put Key: angle Value: -1 ; Key: speed Value: 100 ; Key: wait Value: 2

I commited an error there or maybe is in the construction of the door? Looke at the image and pls help me.
thx.
Title: Re: Problem with doors...i think
Post by: UniqPhoeniX on July 17, 2009, 05:32:19 pm: Entities must be sealed off from void with structural brushes. Doors and the node are entities, the red line shows how an entity can get to void.
Title: Re: Problem with doors...i think
Post by: |MoT|Erfe555 on July 17, 2009, 06:43:00 pm: Thx for help!
Problem solved!
:D
Title: Re: Problem with doors...i think
Post by: mooseberry on July 18, 2009, 12:46:42 am: Quote from: |MoT|Erfe555 on July 17, 2009, 06:43:00 pm
Thx for help!
Problem solved!
:D

The first reply in this thread answered your question. Questions as stupid as these should just be locked like they used to be.
Title: Re: Problem with doors...i think
Post by: Repatition on July 18, 2009, 01:06:48 am: Quote from: mooseberry on July 18, 2009, 12:46:42 am
Quote from: |MoT|Erfe555 on July 17, 2009, 06:43:00 pm
Thx for help!
Problem solved!
:D

The first reply in this thread answered your question. Questions as stupid as these should just be locked like they used to be.
shut up and give a guy the time a day will ya!
Title: Re: Problem with STAGE Doors
Post by: |MoT|Erfe555 on July 18, 2009, 04:59:26 pm: Hi all sry for my incompetence in mapping but i have to ask you another question.
I make a stage door. I make the door normal and i use a trigger_stage to open it at human stage 2.
But when i try the map the door doesn't open.
These are my configuration in GTKRadiant:

Here for the door:

(http://img268.imageshack.us/img268/2213/portam.jpg)

Here for the trigger:

(http://img268.imageshack.us/img268/2468/triggerj.jpg)

How can i solve the problem?
Thx for any help. :)
Title: Re: Problem with doors...i think
Post by: UniqPhoeniX on July 18, 2009, 11:27:01 pm: Setting g_humanstage 1 (stage 2) does not trigger stuff. Use g_humanstage2threshold 0.
Title: Re: Problem with doors...i think
Post by: |MoT|Erfe555 on July 19, 2009, 06:26:22 pm: Now it goes well!
Thx.
Title: Re: Problem with doors...i think
Post by: mooseberry on July 21, 2009, 03:09:29 am: Quote from: Repatition on July 18, 2009, 01:06:48 am
Quote from: mooseberry on July 18, 2009, 12:46:42 am
Quote from: |MoT|Erfe555 on July 17, 2009, 06:43:00 pm
Thx for help!
Problem solved!
:D

The first reply in this thread answered your question. Questions as stupid as these should just be locked like they used to be.
shut up and give a guy the time a day will ya!

One day, maybe you will learn what that actually means, and feel embarrassed and silly. Until then, you shouldn't post if you don't know what is going on.