Tremulous Forum

Community => Servers => Topic started by: |SoH|Link on July 26, 2009, 06:31:19 am

Title: Port/Connection Problem
Post by: |SoH|Link on July 26, 2009, 06:31:19 am

Ok I have a fully set up Tremulous server running and I have ports running for 32123 and 30720 for TCP and UDP. I have the server running on Windows XP Pro. I also have windows Firewall Turned off and don't have any other external firewalls.

This is the problem: People cannot connect to my servers. I have a Belkin F5D8233-4 router. I just cant get other people to connect to it.... I have a static IP and everything too.... Any help/suggestions?

Title: Re: Port/Connection Problem
Post by: Archangel on July 26, 2009, 06:40:33 am

most likely bad NAT handling. odds are you will need a new router.

Title: Re: Port/Connection Problem
Post by: |SoH|Link on July 26, 2009, 06:42:33 am

It works it DMZ enabled, but other computers lose or get limited connectivity like wireless computers. Is there a way to have it enabled and with wireless working?

Title: Re: Port/Connection Problem
Post by: David on July 26, 2009, 01:09:32 pm

Depends on the router.  If it has proper nat and port forwarding set up right, then it should work.
What is the server IP?

Title: Re: Port/Connection Problem
Post by: |SoH|Link on July 27, 2009, 04:54:45 am

The server IP currently is 68.122.217.229:30720

I just reset my router to factory default settings, re-did everything, but instead of doing ports, I am using DMZ option, server is currently up but I am going to constantly restart to try out different settings. Because DMZ is still not allowing my other computers to load internet whatsoever.