Tremulous Forum

Media => Mapping Center => Topic started by: CorSair on July 04, 2010, 08:18:12 pm

Title: Light floods through walls
Post by: CorSair on July 04, 2010, 08:18:12 pm

I don't know what causes it, but the light floods through walls for unknown reason.

And I use fast compile to do this. Maybe it's that what causes it, but what's your opinion?

First pic is outside of the vent...
...And second is the interior.

Title: Re: Light floods through walls
Post by: Plague Bringer on July 04, 2010, 08:46:07 pm

Quote from: CorSair on July 04, 2010, 08:18:12 pm

I don't know what causes it, but the light floods through walls for unknown reason.

And I use fast compile to do this. Maybe it's that what causes it, but what's your opinion?

First pic is outside of the vent...
...And second is the interior.

make sure your brushes meet at 45 degree angles.
          | |
          | |
______| |
          \ |
_______\|
the red and blue both indicate brushes and the purple is where they meet.
if that doesn't work use thicker brushes.

Title: Re: Light floods through walls
Post by: CorSair on July 04, 2010, 11:25:14 pm

Ack, then it means i need to redesing the vents. >:(

I got them 45 degree angle, and brush is 4 GU thick (grid 3 to be specific.)