Tremulous Forum
Community => Servers => Topic started by: adalator on January 09, 2007, 03:41:03 pm
-
q1 i did a deddicated server and found that my servers were appearing in the lan list how do i make it appear in the internet?(this must be nswered!!)
q2. how do i set my admin parameters
?
q3. how do i edit stuff like bps and the maps in the rota?
any help will be greatly appreciated thx :-?
-
RTFM
-
http://tjw.org/tremulous/ might help you :-)
regards
raf
-
Using the Search function on these forums might also have helped you. It might also have made you look a lot less lazy, and devoid of initiative.
-
I am also curious since my clan has the same first two questions. These two aren't in the maual either maci, maybe you should read it; it's a good 10 minute read. We also password protected our server so we could figure everything out before making it public but when I joined, it just let me in without prompting me for the password (on lan).
-
I am also curious since my clan has the same first two questions. These two aren't in the maual either maci, maybe you should read it; it's a good 10 minute read. We also password protected our server so we could figure everything out before making it public but when I joined, it just let me in without prompting me for the password (on lan).
you probably forgot to set g_needpass 1
-
My server doesnt even show up anywhere when I ip connect it always times out
-
My server doesnt even show up anywhere when I ip connect it always times out
What's the IP? 192.168.x.x or 172.16.x.x thru 172.31.x.x or 10.x.x.x? Then you'll have to set up NAT and port forwarding on your router.
-
72.36.226.187:30710 its not online now though
-
and how do you set up a nat????
-
q1 i did a deddicated server and found that my servers were appearing in the lan list how do i make it appear in the internet?(this must be nswered!!)
q2. how do i set my admin parameters
?
q3. how do i edit stuff like bps and the maps in the rota?
any help will be greatly appreciated thx :-?
ok i have no idea for the first 1 but for 2 and 3 do this
for 2 go to your other post, "2 questions for seting up admin" i told you how to do it there
For three these are some cool codes that may help :)
(race)stage 3 = g_(race)stage 2 (yes its 2 not 3 and where race is put Human or alien)
(race)build points = g_(race)buildpoints 9999 (same thing with the race)
To edit your map.cfg go to the place where you instaled tremulous
look for a file called maprotation.cfg then open it
This should be by defult not openable but tell it to open it with any program like notepad.
then you will see a list of maps put the name of any others you want in there.
-
how do I set up a Nat I only have zonealarm no router.
-
Oh you should have no problems then, just allow zone alarm to allow trem to host a server and that should do it :)