Tremulous Forum

General => Troubleshooting => Topic started by: Woo_Hoi on April 11, 2007, 07:45:31 pm

Title: FPS too low
Post by: Woo_Hoi on April 11, 2007, 07:45:31 pm

I get 20 FPS average only , already using the fastest in the option.
It hurts my eyes with such a low fps ....... Do u know how to maximize the FPS I can get?

1 or 2 increases are appreciated. :cry:  :acidtube:

Title: FPS too low
Post by: cp blast on April 15, 2007, 04:12:41 am

Get a good computer. No joke.

Title: FPS too low
Post by: TinMan on April 15, 2007, 04:19:36 am

What are your computer specs?
You might be able to get a good 90 FPS with a cheap video card, I don't know your computer situation though.

Title: FPS too low
Post by: dada on April 15, 2007, 09:43:49 am

/r_pcmip 16

Title: FPS too low
Post by: Xovan on April 24, 2007, 03:40:30 pm

20 fps,

well there is alot really.  Remember you can open the console in the tremulous main menu.

Firstly connect to a low ping server to start.

Next adjust your com_hunkMegs, com_soundMegs, com_zoneMegs so that you are using a reasonable amount of ram to work with.

Furthermore adjust your com_maxfps, if its already pretty high then you may want to scale it back to like 60 or so, that way you aren't wasting processing time when it does get up there.

Next if texture compression isn't already on turn it on in the options menu.

Not sure if trem has it but you can try setting your r_maxpolys and r_maxpolyverts to something a little lower but becareful.

You should also take a look  here  (http://gameadmins.com/modules.php?name=Keen_Guide&op=variables) to see if there is anything else you think you can change.  Especially look under the tweaking part.