Tremulous Forum

General => Troubleshooting => Topic started by: mkralik123 on June 08, 2007, 04:48:42 am

Title: my ports
Post by: mkralik123 on June 08, 2007, 04:48:42 am

i need help setting up ports for my server.... cause its not showing up on the master list... can someone plz help

Title: my ports
Post by: Fluxflashor on June 08, 2007, 04:56:18 am

this may be sopose to go in server section but imma not sure and imma not care.

Ok your problem can be a few things. first off, wait a little while and then look if ur server is there again, can sometimes take a little while before ur server shows up.

Firewall Blocking ports? Disable it, or even better forward the ports. You can find how to do that over at Portforward.com (http://www.portforward.com). That is probably your problem. Make sure you forward 30720 UDP and 30710 UDP . Than reload your server. If that fails... maybe you have a hardware firewall in your modem? I got one of those I cannot host a server for that reason if ym life depended on it.

Also you can try if you know a port is forwarded running your server using a port of your choosing. When in cmd [I am guessing you are usign windows] and you type ur line tremded.exe + set dedicated 2 + exec server.cfg do this instead:

Code: [Select]


tremded.exe + set dedicated 2 + exec server.cfg +set netport [port # goes here]


I think its set netport  but ti could be ser net port.. so a space in between net and port..


I hope this helps, gave it my best shot.

What OS are you using, would be useful to know for further support from othe rplayers and /or me.