Tremulous Forum

Media => Mapping Center => Topic started by: fleash eater on July 26, 2007, 05:18:18 am

Title: need mac radiant help
Post by: fleash eater on July 26, 2007, 05:18:18 am

ok i dont know much about x11 or macradiant but i want to learn, if only gtk would open!
can some one please help me?

i dnt know whas going on

Title: need mac radiant help
Post by: Kaleo on July 26, 2007, 06:55:37 am

Is X11 installed?

If it is, and Radiant just isn't opening, then that is a problem that can be fixed by either Reinstalling Radiant, or if you're a big loss, then Reinstall OS X. If you are using an Intel powered Mac, then just run Radiant in Windows *spit spit*, or better, install Linux and use that.

Title: need mac radiant help
Post by: fleash eater on July 28, 2007, 07:41:36 pm

i did all that(except linux im 13 and broke) and it says error 216 must qut application sorry,bye

IT TICKS ME OFF!!!
so please is there a way i install yhe packs or use trem i make a Q3 map right?

pz help me

Title: need mac radiant help
Post by: AKAnotu on July 28, 2007, 09:05:36 pm

you did the synapse.config and trem.game and all those other file adds, rite?

Title: need mac radiant help
Post by: fleash eater on July 29, 2007, 09:27:34 pm

idk what your talking about, can you tell me how?

Title: need mac radiant help
Post by: Samurai.mac on August 04, 2007, 04:24:38 pm

Are you running on a Power PC or Intel system?

Title: need mac radiant help
Post by: ShadowNinjaDudeMan on August 04, 2007, 04:48:22 pm

You need:

MacRadient
- Tremmapping Wiki

x11
- System Disk
- Download

(if the system doesnt have x11 on disk, or doesnt allow you to install x11 from download, then you also need Pacifist)

Pacifist
- http://www.charlessoft.com/Pacifist_2.0.1.dmg