Tremulous Forum

Media => Mapping Center => Topic started by: GrooveMachine on August 11, 2007, 06:39:15 pm

Title: MacTremMap
Post by: GrooveMachine on August 11, 2007, 06:39:15 pm

Hey guys, I just released a shell script that installs Tremulous mapping files  for MacRadiant 1.5 on your Mac.  Check it out if you can!

Here's the link:
http://www.divshare.com/download/1547699-3bc

Enjoy!

-GrooveMachine

Title: MacTremMap
Post by: ShadowNinjaDudeMan on August 11, 2007, 07:47:45 pm

Exactly what does it install?

Title: MacTremMap
Post by: Death On Ice on August 11, 2007, 09:59:13 pm

Well. There are different versions of Radiant for Intel and PPC Macs.

Problem? :eek:

Title: MacTremMap
Post by: GrooveMachine on August 11, 2007, 11:31:45 pm

Here's what the script does: If you download MacRadiant 1.5 from the link that I put in the Readme, it doesn't come ready for Tremulous mapping.  MacTremMap installs all those pesky files that are needed to map for Tremulous.

Death, I just finished an Intel version for MacRadiant 1.4.  Here are the links:

PPC link:

http://www.divshare.com/download/1550803-e93

Intel link:

http://www.divshare.com/download/1550802-b6d

Enjoy!

-GrooveMachine

Title: MacTremMap
Post by: Death On Ice on August 12, 2007, 12:00:22 am

Nice. I looked at your script, even though I couldn't run it on my computer, and I did everything that your script does. Unfortunately, I can't map. Radiant...acts up. Thanks anyway. :roll: Hopefully your Intel Version will help me. :D

Title: MacTremMap
Post by: GrooveMachine on August 12, 2007, 06:59:39 pm

Hey, I'll give you guys the links again:

PPC Version:

http://www.divshare.com/download/1550803-e93

Intel Version:

http://www.divshare.com/download/1550802-b6d


-GrooveMachine

Title: MacTremMap
Post by: Death On Ice on August 13, 2007, 05:07:26 pm

Radiant has started for me before, when I attempted to set it up first. This was before I knew about the TremMappingWiki, and also on my PPC-Mac.

I'm trying it on my intel one, and I get some errors. I'll give you some screenshots.

Here is the Synapse Error Radiant Gives me:
(http://myskitch.com/deathonice/synapse-error-20070813-090306.jpg)

Here is what I get after running GrooveMachine's Script: (I edited some path-names)
(http://myskitch.com/deathonice/after-running-install-20070813-085825.jpg)

Here is my edited version of the script:
(http://myskitch.com/deathonice/picture_3-20070813-090038.jpg)

Here is my Radiant.log (Copied from ~/.radiant/1.4.0)
(http://myskitch.com/deathonice/radiant.log-20070813-090138.jpg)

Thanks

Title: MacTremMap
Post by: GrooveMachine on August 13, 2007, 06:33:29 pm

Okay, it looks as if I may have a few problems in my script.  In your console.log file that you showed me, it shows the following:

engine path: /Applications/Tremulous/Tremulous/

when it should be this:

engine path: /Applications/Tremulous/Tremulous

without the trailing slash.  I'm not sure how that happened, because it's correct in the script.  A fix for that would be to download another script set that I made here:

http://www.divshare.com/download/1573069-5e5

The two included scripts show and hide "hidden" system files.  Since the file that you need to edit (/Users/miles/.radiant/1.4.0/global.pref) is hidden, you'll need the script for it to work.  I'm not entirely sure that that's the right file to edit,  but it's worth trying.

NOTE:  Don't be afraid if all of your files in Finder disappear for a second.  The script has to reload Finder for it to take action.


Also, my script comes with a folder that is "hidden", where the icon is a small white rectangle (thats hard to accidentally click on), and the name is " " (meaning one space on the spacebar).  I think that that may be why your Terminal is saying that there's no such file or directory.  To open that "hidden" folder, simply do a cursor-drag to highlight all files, and you should be able to see where it is.


As for your synapse error, that is probably happening because one of the files, synapse.config, wasn't moved by my script (for some reason).  A fix for that would be to go to tremmapping.pbwiki.com, and follow the step-by-step instructions there.


My number 1 tip:  Go to tremmapping.pbwiki.com.  It should walk you through all the necessary steps.[/i]

Title: MacTremMap
Post by: GrooveMachine on August 13, 2007, 06:44:21 pm

Also, here's the link for B2:

http://www.divshare.com/download/1574224-fd8

I think it might work this time!

-GrooveMachine

Title: MacTremMap
Post by: Death On Ice on August 13, 2007, 07:02:05 pm

Yeah. Prior to your creation of this script, I had followed the tutorial on the TremMappingWiki, only to have the same result I do now. :cry:

God help me, what the hell is wrong with my computer? :eek:

Title: MacTremMap
Post by: GrooveMachine on August 13, 2007, 07:43:54 pm

I don't know!  How weird!  Try using Blender to map for Tremulous.  I hear it's possible, and much better.

Link:

http://www.blender.org/download/get-blender/

Check it out when you can!

-GrooveMachine

Title: MacTremMap
Post by: Death On Ice on August 13, 2007, 08:02:32 pm

Yeah, I've messed around with Blender before. I'll try it, but I really want to get Radiant to work. I guess I'll emulate it via Linux.

Title: MacTremMap
Post by: Samurai.mac on August 13, 2007, 08:18:30 pm

Do you stil ahve your PPC mac? The PPC version of radiant is much more stable than the Intel version.

Title: MacTremMap
Post by: GrooveMachine on August 13, 2007, 08:41:58 pm

Yeah, I would suggest either Blender or Radiant for Linux (or PPC, if you still have that computer).  I was a little unsure if I should even release an Intel version of MacTremMap, because I've heard that Intel Radiant is really difficult to work with.  Blender is supposed to be better anyway, but my problem right now is finding Tremulous tools for Blender...

-GrooveMachine

Title: MacTremMap
Post by: Death On Ice on August 14, 2007, 08:43:46 pm

Damn... :-?

I'll try it in Linux. :cry:

Title: MacTremMap
Post by: GrooveMachine on August 15, 2007, 12:21:26 am

Yeah, that's what I would do.

Title: MacTremMap
Post by: brightnocturn on September 26, 2007, 09:54:33 pm

I'm really sorry for replying a post this old but i've been trying to get radiant to work for a long time now on my ibook G4. I once messed around so much it screwed up Trem and I had to reinstall it. Anyway I'm trying this again and I saw this script and I say "Just what I need, don't have to do anything, just use the script" I did all the prerequisite in the read me file and I got a permission denied, then I just copy pasted the code into the Terminal (seemed logical) this is what I got
(http://i117.photobucket.com/albums/o51/brightnoctur/Picture2.png)

Title: MacTremMap
Post by: GrooveMachine on September 27, 2007, 03:55:11 am

Did you make sure that the MacTremMap V1 folder is on the desktop?  Hmmmm....other than that, I'm not sure.  You might try going to tremmapping.pbwiki.com.  They have instructions on where to put certain files and stuff.  If you have an AIM Screen Name we could work out the kinks together.  I would really appreciate that.  Thanks!

Title: MacTremMap
Post by: brightnocturn on September 27, 2007, 09:58:07 am

Quote

Did you make sure that the MacTremMap V1 folder is on the desktop?

Yeah... I didn't really want to move anything besides what you asked in the read me file. My AIM is burmesemaniak
hope to see you on AIM... thanks

Title: MacTremMap
Post by: Kaleo on September 29, 2007, 04:48:37 am

Mac Trem Mapping takes weeks to set up, but once your done, you'll be pleased :wink:

Title: MacTremMap
Post by: Mango on October 06, 2007, 04:33:25 am

Heres some files that a guy here known as Eridan gave me a long time ago. They work as far as I know. Included are setup installers for Macradiant 1.4 and 1.5. If the same files are used on Intel machines (I use ppc), then theoretically it should work fine on them.

Tremulous Macradiant Installer (Filefront 602.2 KB) (http://files.filefront.com/Tremulous+Macradiant+Installer/;8726808;/fileinfo.html)

Title: MacTremMap
Post by: -[=AHs=]- DarkEnix on October 08, 2007, 01:51:06 pm

huh?..they keep giving me please reinstall macradient 1.x

Title: MacTremMap
Post by: GrooveMachine on October 09, 2007, 02:04:19 am

Hey, if you're still interested in MacTremMap, check out this other program I made called MacTremFiles.  It includes a revised version of MacTremMap, but the download size is bigger because it comes with a ton of MacRadiant 1.5 (PPC only), the newest Tremulous Backport, and tons of server files.

Check it out here:

http://tremulous.net/phpBB2/viewtopic.php?p=95738#95738

Thanks!

Title: Re: MacTremMap
Post by: Death On Ice on December 16, 2007, 09:55:36 pm

I just want the new version of TremMap plz.

Title: Re: MacTremMap
Post by: Johnpp on December 17, 2007, 04:58:17 am

I want a gig. of RAM, doesn't mean I'm getting it. :p

Title: Re: MacTremMap
Post by: Death On Ice on December 17, 2007, 05:03:48 am

Oh, but I am getting it. The gods of MacTrem have heard my call.

Title: Re: MacTremMap
Post by: GrooveMachine on December 18, 2007, 01:36:25 am

Hey there guys, I've been having some trouble making a new MacTremMap version because I recently installed Leopard on all of my computers.  This has been causing problems because I can no longer use MacRadiant with X11--it just stops and quits when I open it.  I could still try to develop, but it will be a challenge.  I'll start now :)

Title: Re: MacTremMap
Post by: Death On Ice on December 18, 2007, 01:55:52 am

Damnation - I'm going atheist.

Title: Re: MacTremMap
Post by: GrooveMachine on December 18, 2007, 05:23:19 am

Okay guys, I just finished after a day of working on this.  I essentially started from scratch again (which was not fun).  The only problem is that the mirror for the "trem.game" folder on tremmapping.pbwiki.com is down, and no one has it.  I checked my copy of MacRadiant from Tiger, but for some reason I can't find it there either.

I'm pretty sure it will work, but could someone please test it for me (I can't run it because I'm on Leopard)?  Thanks!

Oh yeah!  The links (I MADE AN INTEL VERSION!!!):

PPC: http://www.divshare.com/download/3150475-12b
Intel: http://www.divshare.com/download/3150474-153

-GrooveMachine

P.S. 2100 views! Woohoo!

Title: Re: MacTremMap
Post by: Death On Ice on December 18, 2007, 05:43:25 am

Heh. I should have it still - And I do!

ftp://milescrabill.com/trem.game

Title: Re: MacTremMap
Post by: GrooveMachine on December 18, 2007, 03:34:54 pm

Thanks Death, but what I meant was the trem.game directory located in MacRadiant(version#).app/Contents/Resources/sw/radiant(version#).  Send that to me if you could :)

-GrooveMachine

Title: Re: MacTremMap
Post by: Death On Ice on December 20, 2007, 01:06:52 am

Already did >.>

Ay I Emm

Title: Re: MacTremMap
Post by: GrooveMachine on December 24, 2007, 02:16:35 am

Okay.  Well, the downloads on DivShare work correctly now.  Same links.  Get em now!

-GrooveMachine