Hosting trem server.

[Thorn]

Hi,

When i host a trem server it only works on the LAN , nobody can connect from internet using /connect command or from master server. It doesent even apear on the master server.

[Neckhole]

Do you sit behind a firewall of any kind?  It could explain why people can't connect.  If the masterserver also can't query your server, it might not get listed.  But I'm not entirely sure how that works.

[Stof]

Check that the option to report to the Master Server is ON and not OFF.

[Caveman]

- Portforwarding
- Nating
- firewall

.oO( Me thinks he did ask the same question several weeks ago )

[Thorn]

i can turn all firewalls of including router firewall and it still doesent work.

Yes i asked this a few weeks ago and got useless replies.

[Caveman]

Turning the FW is always a bad idea, especially if it's the FW on the router as in that case the FW is responsible for the nat'ing/forwarding.

put your trem-server into your DMZ forward _all_ ports to it and have a look again .)

[Somethief]

1. Double-check that you set dedicated to 2 (internet), not 1 (default)
2. Allow ALL traffic to 30720 (or whatever is your server port) and outgoing acces to port 30710 (master server, hopefully i remember the port correctly). Some of firewalls (zone-alarm, for example) take out traffic to udp port 30720, called "Normal internet background noise".
3. Make sure that the server ip is not listen on master server ping timeout list (check list of servers: http://tremmap.quakedev.org), if it is listed as ping timeout, your firewall (ISP or router may block it too) prevents access to tremulous server.

Ok, too much shit, tell you results and i will tell more
(Which OS u are using?)