Author Topic: How to find more server?  (Read 3474 times)

marshal

  • Posts: 5
  • Turrets: +0/-0
How to find more server?
« on: January 25, 2007, 07:27:57 am »
I picked view empty and view full, but still there are only 20~30 server in my list and I can't find my fd's server

When I press get new list,  all servers in the list gone and it said -1 serve listed...........what's happening?

Raytray

  • Posts: 355
  • Turrets: +3/-19
    • http://trem-null.com
How to find more server?
« Reply #1 on: January 25, 2007, 12:42:44 pm »
Press ~ and see what shows up.


Also make sure it says INTERNET at the top left hand corner.
Most likely it's a problem with your connection.
}MG{Raytray

mooseberry

  • Community Moderators
  • *
  • Posts: 4005
  • Turrets: +666/-325
Server issue
« Reply #2 on: March 29, 2007, 03:56:53 am »
OK, a few things:

* one is yes, check in the top left, and see if you are looking for servers in the internet.

* also, if all it says is "Getting info for -1 servers", that means that your internet is eighter down, or not connected to master tremulous.

* If you only get a few servers, (rember to hit get new list, and refresh list periodicly) open your console by pressing the ` button (above Tab) this should pull down your console and it will say something like: 55 servers not listed due to packet pings higher than 800. In that case, your internet connection is eighter really bad, for some reason you are having diffuculty connecting to master tremulous, or your ram is really low.
Bucket: [You hear the distant howl of a coyote losing at Counterstrike.]

मैं हिन्दी का समर्थन

~Mooseberry.

TRaK

  • Posts: 442
  • Turrets: +94/-21
    • TRaK@MG
How to find more server?
« Reply #3 on: March 29, 2007, 05:18:03 am »
Sometimes programs prevent you form connecting. I run peerguardian at startup, and I need to shut it down to get any servers on my list.

Chinaboy

  • Posts: 4
  • Turrets: +0/-0
How to find more server?
« Reply #4 on: March 29, 2007, 10:42:16 pm »
Sometimes your router prevents you from connecting, although it shouldn't do that.

Consult your router's documentation (although those things are a piece of ..bad smelly things).