Pages: [1]   Go Down

Author Topic: Admin.dat file  (Read 2911 times)

Zero

  • Posts: 129
  • Turrets: +5/-19
Admin.dat file
« on: February 23, 2008, 05:46:50 am »
if anyone here knows how to set flags in the admin.dat file please let me know cause i wanna set them for my server and i dont understand the codes
Logged

PIE

  • Posts: 1471
  • Turrets: +96/-52
    • http://www.mercenariesguild.net
Re: Admin.dat file
« Reply #1 on: February 23, 2008, 05:52:17 am »
Logged

Zero

  • Posts: 129
  • Turrets: +5/-19
Re: Admin.dat file
« Reply #2 on: February 23, 2008, 06:49:15 am »
hmmm thx for that, cause it helped me figure out what those letters are and why they are there. Now can anyone tell me how to get more cmds other than the default ones? Cause in my clan im in, the server owner has about 90 something cmds. Im not sure if it has to do with a svn patch or game.qvm. I cant ask him cause hes practically never on so i might as well ask you guys here.
Logged

Rocinante

  • Posts: 642
  • Turrets: +252/-668
    • My Homepage
Re: Admin.dat file
« Reply #3 on: February 23, 2008, 07:27:07 am »
There's two types of commands; those which are coded into the QVM, and those which you write by creating a .cfg file on the server and adding a [command] block to admin.dat.  For examples of the latter, see this article.  But if you're looking for QVM commands (such as !pause, !revert, etc) then you'll need a different QVM than the one you're running.  Either install a prepackaged one (Lakitu7's is a good choice) or download the source and start patching :>
Logged
}MG{Mercenaries Guild
"On my ship, the Rocinante, wheeling through the galaxies, headed for the heart of Cygnus, headlong into mystery." -- Rush, "Cygnus X-1"

Zero

  • Posts: 129
  • Turrets: +5/-19
Re: Admin.dat file
« Reply #4 on: February 23, 2008, 08:13:42 am »
ok so i download the qvm and tremed and i replace the tremed and qvm with the old qvm and tremed i had? Sorry for asking so many questions but i dont know much about the files in runnning a tremulous server. Lakitu7's patch has stuff like pause and revert and all these other cmds, but the only problem i have is not knowing how to use or put those files in their proper locations. oh and the patches open up in links, do i have to copy what is in those and put it in the correct folders?
« Last Edit: February 23, 2008, 08:28:17 am by Zero »
Logged

Zero

  • Posts: 129
  • Turrets: +5/-19
Re: Admin.dat file
« Reply #5 on: February 23, 2008, 08:38:03 pm »
k im just gonna wait till someone else tells me
Logged
Pages: [1]   Go Up