Server not showing up in master list

[Bissig]

You should try to forward a bigger range f.e. ports 30720 - 30721/22

Also, the screenshot you posted looks more like a knockknock port hiding feature then like port forwarding settings.

Another question:

Did you use "Get new list" to get the master list after you started your server?

[HalcyonNL]

You should try to forward a bigger range f.e. ports 30720 - 30721/22

Also, the screenshot you posted looks more like a knockknock port hiding feature then like port forwarding settings.

Another question:

Did you use "Get new list" to get the master list after you started your server?

Forwarding multiple ports, unfortunately, doesn't work either

Could you explain what you mean by "knockknock port hiding feature"? :S

And yes, I used "Get New List" with every change.

[gimhael]

Have you set a sv_hostname in your server.cfg ? Maybe it's there between the gazillion unnamed Tremulous-1.1.0 servers.

[HalcyonNL]

Have you set a sv_hostname in your server.cfg ? Maybe it's there between the gazillion unnamed Tremulous-1.1.0 servers.

Yes, I have

[Caveman]

please explain more about your router and that "trigger protocol" - Stuff .)

[HalcyonNL]

please explain more about your router and that "trigger protocol" - Stuff .)

Sorry, I don't know what that "trigger protocol" stuff is, either. Anything else you'd like to know about the router?

[Caveman]

Yeah, it's exact brand so we can discourage others from buying it.
And while you are at it, please be so kind and read up on configuring it.
If that is not possible try asking the vendor/manufacturer on how to.

[HalcyonNL]

Yeah, it's exact brand so we can discourage others from buying it.
And while you are at it, please be so kind and read up on configuring it.
If that is not possible try asking the vendor/manufacturer on how to.

It's one of those sh!tty "Thompson Speedtouch 780"s. And if you don't mind, I don't feel like reading up on things that probably already work
It'd be another story if it didn't...

[kevlarman]

if you can figure out how to use a packet sniffer, make sure that after every heartbeat, you get '\xff\xff\xff\xffgetinfo' from master.tremulous.net (the source port will NOT be 30710 to check that your nat is set up properly)

[cactusfrog]

you can always connect my typing /connect [stagnet ip]:[port you forwarded to]

[brendanvos]

So is there any thing I can do to make my server show up in the master list? I have my port forwarding set to Tremulous Start: 32123 End: 32123 and Both UDP and TCP. Anything I can change? My friend can access the server by adding my server name and ip address but only if we are on the same network. I've spent many hours working on setting up a sever and I really need a solution. kthxbi!

OHHH AND PS. I USE A LINKSYS WRT54G ROUTER!

[cactusfrog]

well you can always add it to favorites and then when you want to connect to your server you just switch the server list from internet to favorites. or you can always make a bind like /bind f5 connect [your local ip]:32123

[brendanvos]

the only problem is that it can only be added to friends/connected to from the network I set it up on.

[Bissig]

So is there any thing I can do to make my server show up in the master list? I have my port forwarding set to Tremulous Start: 32123 End: 32123 and Both UDP and TCP. Anything I can change? My friend can access the server by adding my server name and ip address but only if we are on the same network. I've spent many hours working on setting up a sever and I really need a solution. kthxbi!

OHHH AND PS. I USE A LINKSYS WRT54G ROUTER!

Well, apparently your router is still blocking access outside the local network. Which means you need to put it into the DMZ zone or something similar in your routers firewall configuration. Unless I misunderstood what you were trying to do.

[brendanvos]

You mean like this?

[brendanvos]

sorry i couldnt get the screen shot to show up so i posted a link to it

[HalcyonNL]

if you can figure out how to use a packet sniffer, make sure that after every heartbeat, you get '\xff\xff\xff\xffgetinfo' from master.tremulous.net (the source port will NOT be 30710 to check that your nat is set up properly)

Ok I'll try that.