Author Topic: Tremulous Mapping Guide Splitoff (Read 40339 times)

Survivor · « **Reply #60 on:** June 02, 2007, 06:55:07 pm »

You need not really bother with q3map2toolz other than its mapacker but q3map2 is essential and common.

sSopris · « **Reply #61 on:** June 03, 2007, 03:19:01 pm »

Ok, just to clarify: I would put the q3map2 file in C:/Program Files/Tremulous/radiant-1.4 right?

(I use 1.4)

gareth · « **Reply #62 on:** June 03, 2007, 05:47:02 pm »

i dont see why you need to get the newest version, only if the one you have doesnt work for you.

sSopris · « **Reply #63 on:** June 03, 2007, 06:19:57 pm »

Umm, what do you mean? The newest version of Radiant?

My problem is that I don't know where to put the q3map2

EDIT: It looks like its a stand alone program but whenever I try to run it I get a little black window that looks like command prompt and then closes after 5 seconds.

Survivor · « **Reply #64 on:** June 03, 2007, 10:52:18 pm »

It is standalone but needs either to be started with switches defined by -switchname value in a cmd prompt or the run window or with a gui frontend like q3map2toolz or q3build. Of these two it is experienced that q3build is the easier one while q3map2toolz has some mappacking features that add to it.

sSopris · « **Reply #65 on:** June 04, 2007, 06:15:43 am »

Hmmm. When I run Q3map2Build the maps don't show up in the list. My maps are in C:/Program Files/Tremulous/base/<.map files> but they're still not showing up. All the correct paths have been given in Directory Options as well.

Also, when I downloaded the VB6 Runtimes from here and ran it, it asked if I wanted to install them. I clicked yes and a window popped up with a progress bar. The progress bar filled up very quickly, disappeared and that was that. I assume this means it installed them but maybe you guys think otherwise?

(Btw, I really do appreciate your guys' help)

EDIT:

Ok, basically my maps just won't show up, any ideas?

sSopris · « **Reply #66 on:** June 06, 2007, 03:34:21 am »

Lets try this again. I have downloaded q3map2 and q3map2build. I'm pretty dang sure I've installed them correctly. However, *.map files are not showing up in q3map2build. Any ideas?

(I'm putting my *.map files in C:/Program Files/Tremulous/base/)

n00b pl0x · « **Reply #67 on:** June 06, 2007, 04:01:18 am »

maybe you should split this convo into a troubleshotty thread

thunderdraco · « **Reply #68 on:** August 01, 2007, 03:52:43 pm »

sounds like a plan.

Anyway I have the same problem floodbud had months ago which i dont know why many people dont have the same problem. :\ Let me quote him.

Quote

Ive been working on this for about 3 hours over the past 2 days and it still wont pull up Tremulous in the drop menu

Thats my problem. I did everything it said for the setup of radiant 1.5 but it still wont show tremulous in the drop menu. Can u maybe give me a checklist of all the actions i was supposed to do? I'm pretty sure i did everything. But yeah....

lol armory

ShadowNinjaDudeMan · « **Reply #69 on:** August 01, 2007, 03:58:36 pm »

Check:

Code: [Select]


<?xml version="1.0"?>
<game
type="q3"
index="1"
name="Tremulous"
enginepath_win32="<path to Tremulous>/"                                                <----Check the filepath is correct to your PC.
enginepath_linux="/usr/local/games/tremulous/"
enginepath_macos="/Applications/Tremulous/"
engine_win32="tremulous.exe"
engine_linux="tremulous"
engine_macos="tremulous.app"
prefix=".trem"
basegame="base"
basegamename="Tremulous"
unknowngamename="Tremulous modification"
shaderpath="scripts"
archivetypes="pk3"
texturetypes="tga jpg"
modeltypes="md3 ase lwo obj 3ds picoterrain"
maptypes="mapq3"
shaders="quake3"
entityclass="quake3"
entityclasstype="def"
entities="quake3"
brushtypes="quake3"
patchtypes="quake3"
/>

Check you have customized the .game file, and not just copy pasted blindly (se above for what to personalize.

This is what I did (or didnt) do, I feel pretty dumb about it even now.

thunderdraco · « **Reply #70 on:** August 01, 2007, 06:53:38 pm »

I checked. I already did that, and it is indeed the correct path... I dont know whats wrong.

lol mara

thunderdraco · « **Reply #71 on:** August 02, 2007, 09:15:47 pm »

ok seriously. does NO ONE know? When there are thounsands of people who play trem and make maps?

Survivor · « **Reply #72 on:** August 02, 2007, 10:03:19 pm »

Seperate topics get more attention.

Thorn · « **Reply #73 on:** August 03, 2007, 01:44:31 am »

trem.game is in wrong location

thunderdraco · « **Reply #74 on:** August 04, 2007, 03:44:16 pm »

it belongs in the gtkRadiant 1.5.0 folder does it not?

Thorn · « **Reply #75 on:** August 04, 2007, 04:06:49 pm »

no, the .game file belongs in radiant/games

ShadowNinjaDudeMan · « **Reply #76 on:** August 04, 2007, 05:01:02 pm »

!BUSTED!

thunderdraco · « **Reply #77 on:** August 05, 2007, 04:03:13 pm »

ok now after realizing what actual file you were talking about; it is in there already. So what now...

Quote

!BUSTED!

owned*

Thorn · « **Reply #78 on:** August 05, 2007, 07:20:56 pm »

Is the trem.game FOLDER in /radiant ?

thunderdraco · « **Reply #79 on:** August 06, 2007, 09:04:16 am »

your face · « **Reply #80 on:** September 06, 2007, 02:37:47 am »

Quote from: "ShadowNinjaDudeMan"

!BUSTED!

lol

also i make maps and i use gtk 1.5. and brain uses 1.4 AND 1.5 combined, ask him, sopris. on teh {NoS} forums. k? he knows...

Green Dragon · « **Reply #81 on:** October 16, 2007, 12:10:26 am »

I'm kind of new to Tremulous and i want to make my own map, so how do i make a map?

Green Dragon · « **Reply #82 on:** October 16, 2007, 12:22:49 am »

if you can help me plz help me figgure out why i can't make a map!

mooseberry · « **Reply #83 on:** October 16, 2007, 01:58:54 am »

Quote from: "Green Dragon"

if you can help me plz help me figgure out why i can't make a map!

That isn't that helpful, please explain your problem, if you have no idea what to do read: TFM

If it is something more specific, like "why don't I have any textures?" please say that.

Green Dragon · « **Reply #84 on:** October 16, 2007, 03:06:40 am »

on Tremulous i click creat a map and then this tremulous console pops up and i can't figuer out what to do from there.

mooseberry · « **Reply #85 on:** October 16, 2007, 03:23:22 am »

Quote from: "Green Dragon"

on Tremulous i click creat a map and then this tremulous console pops up and i can't figuer out what to do from there.

...

there is no "create a map" button in tremulous, you must be doing something wierd. You make maps with GTKRadiant.

Taiyo.uk · « **Reply #86 on:** October 16, 2007, 03:32:16 am »

Troll.

CreatureofHell · « **Reply #87 on:** October 16, 2007, 10:16:51 pm »

On trem I think you click create server which is somwthing completely different. No point in double posting and this should be a seperate topic.

Green Dragon · « **Reply #88 on:** October 16, 2007, 10:23:41 pm »

i want to creat server but i can't. a Tremulous cosole pops up and i don't know what to do.

St.ElseWhere · « **Reply #89 on:** April 14, 2009, 12:15:05 am »

Argh! i just cant freaking figure out why only the turret appears and all the buildings just show up as freaking boxes... And, the turret is only partially texurised. Is texurised a word? Also is it normal for the textures to "blurr" (best way to decribe) when using the clipper, and several others tools? Meh... also where do i download textures. Any help would be appreciated!

News:

Author Topic: Tremulous Mapping Guide Splitoff (Read 40339 times)

Thorn

Thorn

Thorn

St.ElseWhere